EP-133 K.O. II MIDI: what it actually sends and takes

Measured on a 128 MB EP-133 K.O. II running OS 2.5.1, connected over USB, by logging its MIDI output and recording its USB audio. Nothing here comes from the manual unless it says so. Other firmware versions may differ.

In short

PLAY sends Song Position 0 + Continue, never Start. STOP sends Stop + CC 120. Pads send notes only with their own MIDI channel (or under code 110). CC 12/13 move the FX only under 110. The device sends no CC for its own knobs.

Transport and clock

Notes

Control changes

CC 12 / 13 under 127 OFF

  • Change nothing (measured 24 October and 5 November 2026, delay effect on).

CC 12 / 13 under 110 ALL

Velocity

With velocity mode on, three light, three medium and three hard taps per key, all in the middle of the key, gave these MIDI velocities on one unit:

KeyLightMediumHard
5 (center)57 to 6576 to 84101 to 117
252 to 5965 to 67 (one 114)127
. (bottom left)55 to 5757 to 58 (one 88)122 to 127
0 (bottom middle)56 to 6265 to 7097 to 113
E (bottom right)55 to 6154 to 63121 to 126

The floor is the same everywhere (about 55). On the bottom corners a medium tap barely moves above it and then jumps close to the top; the center key has the smoothest range. Pressing 0 near its top edge didn't help (light 47 to 59, medium 57 to 70). Small sample and human fingers, but it looks like how the keys are built rather than a faulty unit.

File transfers (SysEx) and sound

Not measured yet

System MIDI codes 111 to 126 in practice, the EP-40, firmware other than 2.5.1, and note-offs from the sequencer. If you have measured any of these, write to support@getpadwork.app.

These measurements come from building Padwork, a free browser app for the EP-133.

Last checked: 6 November 2026, OS 2.5.1