<!-- EP-133 synced to a sequencer without playing its notes · https://getpadwork.app/howto/midi-in -->
[Padwork](https://getpadwork.app/) › [How-to](https://getpadwork.app/howto/) › Sync without notes

# EP-133 synced to a sequencer without playing its notes

A question that comes back on the forums: the EP-133 K.O. II follows the clock of a DAW or a hardware sequencer, but the notes meant for other instruments play its pads too. Whether incoming notes play pads depends on the system MIDI setting and on each pad's MIDI channel. Here is what we measured on a unit running OS 2.5.1.

**In short:** Set the system code to 127 (SHIFT+ERASE 127 ENTER) and leave the pads on MIDI "default": notes from the sequencer then play nothing. Give a pad its own channel only if you want it played.

## What plays a pad

### Code 127 OFF

- A pad left on "default" in Sound Edit ignores incoming notes.

- A pad with its own MIDI channel plays any note arriving on that channel, pitched from its root.

### Code 110 ALL

- Pads on "default" play from incoming notes on any channel, one note per pad (group A 36 to 47, B 48 to 59, C 60 to 71, D 72 to 83).

- Pads with their own channel behave as under 127.

## Clock only, no notes

- Set code 127: SHIFT+ERASE 127 ENTER.

- Leave the pads on "default". Notes from the sequencer then play nothing, whatever channel they are on.

- Turn on clock in as usual (code 101 in the manual's table).

We measured the note side, not clock in, so check that your sequencer's start and stop reach the EP-133.

## Only some pads from the sequencer

Under 127, give just those pads a MIDI channel in Sound Edit, a different one for each pad. Each one then plays only from its channel, at the pitch you send. Two pads on the same channel play together, so one channel per pad.

## One channel per group?

Not on OS 2.5.1. The setting is per pad, and pads that share a channel all play on every note. The closest thing is one pad per channel, up to 16 pads.

## More detail

What the pads send, the sequencer's notes and the full channel rules are on [EP-133 MIDI channels: which pad sends what](https://getpadwork.app/howto/midi-channels). [Padwork](https://getpadwork.app/) sets a whole group's pad channels in one click if you want them, using the same per-pad setting.

Last checked: 2 November 2026, OS 2.5.1
